TCR Tecora

TCR Tecora's Environmental Research Unit is the research unit of TCR Tecora, a leading Italian private company that develops, manufactures and delivers tools for air pollution sampling and emissions analysis.

Bravo Basic

Bravo Basic e TCR TECORA constant flow sampling device

For more than 20 years, Bravo has been synonymous with secure, precise and entrusted sampler.

Bravo Basic is the economic and practical version of portable fixed flow samples that are suitable for dust and gas sampling either in a chimney or in the environment.

The digital thermometer shows the measured gas temperature in the gas meter.

The test flow rate shall be adjusted and recorded by two rotameters.

A vacuum-meter measuring panel gives the pressure drop readings of the connected devices and allows the sampling lines to leak.

With Bravo Basic, three different types of pumps are available: "two rotary blades" and "membrane pump".

SKYPOST

Skypost PM is automatically detected
station for continuous atmospheric
particulate monitoring by sampling
filter method with a diameter of 47 mm
membrane.
The system of consistent replacement of
filter membrane with 16 membranes
capacity uniform with the electronic flow
the speed regulator allows continuous,
operations without supervision.
The special implementation of the replacement filter
system allows the replacement of the
exposed filters without interrupting the
sampling, therefore there is no need to
intervene within a predetermined interval.
It is produced in two variants with different
Debits.
The Skypost PM model has a flow rate of up to 30 l/min and Skypost PM HV
Pattern up to 50 l / min flow rate.
The HV version is suitable for dust sampling, in particular at LVS PM10 2.3 m3/h
the sampling chapter which is in accordance with EN 12341.
The modularity of the sampling head allows the use of chapter USEPA 40 CFR Part 50 too.
The straight path of the suction tube and the separation of the permanent zone. \ T
filters from the internal or emitting heat source, allows for the preparation and maintenance of the integrity of the
of the samples.
The appliance allows ventilation system and differential thermoregulating heating system
work even in the most extreme surrounding conditions